财政分权对环境污染的空间效应

利用2006—2017年我国30个省级行政单位的面板数据,采用空间计量模型对财政分权与环境污染之间的关系进行实证分析,并通过效应分解分别计算出财政收入分权和财政支出分权对环境污染的直接效应、空间溢出效应和总效应。模型估计的结果表明:①财政收入分权与财政支出分权通过直接效应和空间溢出效应两种途径对环境污染产生显著影响,但收入分权与支出分权对环境污染的空间效应具有异质性。②财政收入分权对环境污染具有显著的负向直接效应和负向空间溢出效应,影响系数分别为-5.429和-17.572。提高财政收入分权度不仅有利于减轻本省份环境污染,也对邻近省份的环境污染起到抑制作用。而财政支出分权对环境污染具有显著的负向直接效应和正向的空间溢出效应,影响程度分别为-3.345和1.173。提高财政支出分权虽然有利于减少本省份污染的排放,但在一定程度上引起省际的污染外溢效应,提高邻近省份的污染程度。③从总效应来看,财政收入分权和财政支出分权对环境污染均呈现出显著的负向相关性,影响程度分别为-23.001和-2.172。提高财政分权可降低环境污染水平,有利于环境质量提升。④通过构建不同空间权重矩阵,检验模型的稳健性,结果表明模型估计是稳健可靠的。根据分析结论,可能的启示与建议有:①合理划分中央政府和地方政府之间的财政事权和支出责任,在提高财政支出分权度的同时提高地方政府财政收入分权度,充分发挥地方政府环境治理的积极性和主动性。②继续加大生态环境保护力度,完善绿色经济考核机制,引导地方政府加大对污染治理和环境改善的支出水平及效率。     

Dynamic Bayesian networks for reliability evaluation of subsea wellhead connector during service life based on Monte Carlo method

The subsea wellhead connector is a critical connection component between subsea Christmas tree and subsea wellhead for preventing the leakage of oil and gas in the subsea production system. Excited by cyclical loadings due to environmental forces and the other support forces, the subsea wellhead connector is prone to the failure, which could lead to the loss of subsea tree or wellhead integrity and even catastrophic accidents. With the Monte Carlo simulation method, this paper presents a reliability analysis approach based on dynamic Bayesian Networks, aiming to assess the failure probability of the subsea wellhead connector during service life. Take the driving ring component of the subsea wellhead connector as an example to demonstrate the reasonability of the proposed model. The generation data is processed by the transform between the numerical value and the state variable. Based on the stress-strength interference theory, the structure reliability of the driving ring with 96.26% is achieved by the proposed model with the consideration the aging of the material strength and the most influential factors are figured out. Meanwhile, the corresponding control measures are proposed effectively reduce the failure risk of the subsea wellhead connector during service life.     

Critical review for the quantification of leachate production: Evaluation example for the “Oum Azza” public landfill in Rabat city,Morocco

The estimation of leachate quantities produced in landfills is necessary to dimension the treatment plants allowing to reduce the polluting load of these effluents and consequently avoid their negative impacts on the environment. Different leachate quantification methods were used in this study to assess the leachate volume produced at the Oum Azza landfill. The water balance method give comparable estimations of leachate production to the Ouled Berjal landfill ratio. The first method showed average values between 487 and 495 m³/day for 2015, 2018, and 2019, and at the same time, the second method gave values between 470 and 477 m³/day for the same years. In contrast, the World Bank ratio showed high values that vary between 2260 and 2295 m³/day for 2015, 2018, and 2019. The on-site data and the statistical analysis showed us that the World Bank ratio is not adapted for the estimation of the leachates produced in Oum Azza landfill, while the water balance and the ratio of Ouled Berjal landfill allowed to give comparable results to reality.     

Diversity of antibiotic resistance genes and encoding ribosomal protection proteins gene in livestock waste polluted environment

The rapid development and increase of antibiotic resistance are global phenomena resulting from the extensive use of antibiotics in human clinics and animal feeding operations. Antibiotics can promote the occurrence of antibiotic resistance genes (ARGs), which can be transferred horizontally to humans and animals through water and the food chain. In this study, the presence and abundance of ARGs in livestock waste was monitored by quantitative PCR. A diverse set of bacteria and tetracycline resistance genes encoding ribosomal protection proteins (RPPs) from three livestock farms and a river were analyzed through denaturing gradient gel electrophoresis (DGGE). The abundance of sul(I) was 10³ to 10⁵ orders of magnitude higher than that of sul(II). Among 11 tet-ARGs, the most abundant was tet(O). The results regarding bacterial diversity indicated that the presence of antibiotics might have an evident impact on bacterial diversity at every site, particularly at the investigated swine producer. The effect of livestock waste on the bacterial diversity of soil was stronger than that of water. Furthermore, a sequencing analysis showed that tet(M) exhibited two genotypes, while the other RPPs-encoding genes exhibited at least three genotypes. This study showed that various ARGs and RPPs-encoding genes are particularly widespread among livestock.     

非柔性连接石化储罐配管温差应力分析与对策

储罐配管在温差作用下产生热位移会导致管壁产生热应力，未采用柔性连接的配管由于热应力集中作用可能发生破漏。针对与石油化工储罐非柔性连接的配管的安全问题，应用ANSYS有限元分析软件模拟计算石化企业典型配管的热应力分布；根据不同类型配管的分析结果，提出了工程技术与管理方面的针对性安全措施。研究结果表明:温差效应对石化储罐配管热应力影响显著，随内外温差的增加，配管应力集中的区域增大，最大热应力值增大；补偿措施能够改善配管的柔性，降低配管应力；约束载荷限制配管热膨胀从而增大配管应力；三通管是多根配管接合的区域，这种复杂管道交汇处会形成明显应力集中。研究结果对于提高石油化工非柔性连接配管安全性有一定的指导意义。     

煤与瓦斯共采在错层位巷道布置中的机理研究及应用构想

为了完善现有煤与瓦斯共采技术，创新煤与瓦斯共采方法，对错层位巷道布置下的煤与瓦斯共采系统展开研究，利用相似模拟试验，分析错层位巷道布置覆岩运动情况，预测其开采围岩裂隙发育和瓦斯运移形式，提出了创新煤与瓦斯共采技术构想。研究结果表明:采空区覆岩三带高度随接续工作面的增加而增大，相邻采空区垮落矸石压实区呈现“O-L-O”形变化，多个相邻采空区覆岩出现大“O”形圈裂隙带；相邻采空区内瓦斯可实现相互运移，大“O”形圈裂隙带内赋存大量瓦斯气体；研究提出了地面钻井抽采瓦斯、走向高位瓦斯抽采巷和外错尾巷穿层钻孔3种煤与瓦斯共采技术，比传统巷道布置情况下的煤与瓦斯共采技术在安全、经济等方面更具优势。     

我国区域空气污染治理效率及其影响机制——基于超效率SBM模型和门槛回归模型

随着人民对美好生活需求的日益增长,政府空气污染治理的效率问题日益得到重视。本文从地方政府空气污染治理效率及其影响因素的视角入手,以全国30个省份为研究对象,运用超效率SBM模型测算2003—2015年各省级区域的空气污染治理效率。在此基础上,运用门槛回归模型分析政府空气污染治理效率的影响机制。研究表明:①地区间空气污染治理效率差异性较为显著。中部、西部空气污染治理效率整体呈下降趋势。东部和东北地区空气污染治理效率则上升比较平稳。②政策规划、碳源、污染物排放和环境治理投入表现出双重门槛特征,其中碳源对空气污染治理效率影响显著,而以碳为首的能源消费结构则主要对中部和西部空气污染治理效率产生影响。落后地区政府应注重产业升级,财政上应对碳税等税目进行征收,产业上应鼓励企业创新,并对落后企业进行倒逼升级。     

考虑岩石抗拉强度受围压影响的地层破裂压模型

预测地层破裂压力是地下流体注入工程中的关键问题，关系到工程的稳定性和安全性。根据地测资料，岩石的抗拉强度会随着围压产生变化，然而目前常见的地层破裂压预测模型均未考虑该因素。基于厚壁圆筒法，针对2种砂岩开展不同围压条件下的砂岩致裂试验，根据试验数据，计算各组试验中试样的抗拉强度，并拟合围压与岩石抗拉强度的关系函数。研究岩石抗拉强度随围压变化的规律，提出能在实际地层中表征该规律的参数，基于该参数对现有的地层破裂压模型进行修正，并结合实测数据验证修正模型的可靠性。研究结果表明:岩石的抗拉强度随着围压的增加呈现明显的线性正相关关系，低围压下，新模型的预测结果与实测数据较为接近。随着围压增加，二者的差异逐渐增大，说明选取的特征参数在低围压下能较好地描述抗拉强度受围压的影响效应，而高围压下参数的取值需进一步研究。     

煤对CO2，N2和CH4的吸附速率经验公式与异同性研究*

为了解决吸附速率拟合公式缺乏而解吸经验公式众多的问题，通过替换解吸参数、定性和对比分析各经验公式对煤吸附CO₂，N₂，CH₄吸附速率的适用性，选取4种不同煤质的煤样在0.5，1.0和2.0 MPa下进行定温吸附实验，分析压力和煤质对吸附速率的影响规律。研究结果表明:时间函数式对3种气体在不同压力和煤质下的吸附速率拟合效果最佳；压力和煤质对3种气体吸附速率的影响既存在共性又具有差异性，气体吸附速率与压力符合指数函数关系，与挥发分呈现出二次函数关系，并且压力升高会导致最低吸附速率趋向于较高变质程度煤样；CH₄和N₂的吸附速率随压力升高而升高，而CO₂的吸附速率因煤样而不同，且在同压下，不同气体的最高和最低吸附速率煤样的变质程度也不同。     

基于响应曲面法的遗煤自燃分析与研究*

为研究高瓦斯易自燃煤层不同供风量、高抽巷抽采流量、低抽巷抽采流量3因素对采空区自燃“三带”分布影响规律，选取阳煤五矿8406工作面为研究对象，在数值模拟研究基础上，采用Design Expert软件进行Box Behnken试验设计，构建采空区氧化升温带宽度在3因素、3水平条件下的二次回归响应曲面模型，并对不同条件下采空区氧化升温带宽度进行预测与分析。结果表明:二次回归方程P值为0.001 6，预测模型显著，模型的失拟项为0.606 3，不显著，回归方程具有统计学意义；当供风量为1 500~2 000 m3/min，低抽流量为450~650 m3/min，高抽流量为100~200 m3/min时，对氧化升温带宽度一次项重要度排序为C（高抽巷抽采流量）>A（供风量）>B（低抽巷抽采流量），二次项重要度排序为AC（供风量和高抽巷抽采流量）>AB（供风量和低抽巷抽采流量）>BC（低抽巷抽采流量和高抽巷抽采流量），且AB,AC,BC之间均无交互作用。